hand launch airplane A1-V2
3d printing volume required (220 x 220 x 250 mm)
| Wingspan: | 820mm (32 inches) |
| Lenght: | 610mm (24 inches) |
| Height: | 186mm (7 inches) |
| Wing loading: | 73.7g/dm2 |
| Center of gravity: | 50 mm / 1.9 inches = from leading edge |
| Airfoil: | Eppler E171 |
| Print weight (LW PLA): | 58g |
| Take off weight: | 664g |
| Motor: | BL Outrunner 2814 1380 KV |
| ESC: | 20A 2-6S |
| Propeller: | APC PROPELLERS 7×6 “ |
| Battery: | 3S 11.1V 1250mAh 30C/60C |
| for 4-channel control: | Motor, elevator, rudder |
slicer
print profile
assembling manual
accessories
Center of gravity
maiden flight