hand launch airplane
3d printed
easy to print, easy to assemble, easy to fly
3d printing volume required (220 x 220 x 250 mm)
| Wingspan: | 820mm (32.0 inches) |
| Lenght: | 610.0mm (24.0 inches) |
| Height: | 129.7mm (5.1 inches) |
| Wing loading: | 38.38g/ dm2 |
| Center of gravity: | 50 mm / 1.9 inches = from leading edge |
| Airfoil: | CLARK_Y |
| Print weight (LW PLA): | 382g |
| Take off weight: | 580g |
| Motor: | BL Outrunner C27-13-1800 KV |
| ESC: | BL-Control 715-BEC |
| Propeller: | Slowfly-Propeller 8×4 |
| Battery: | 3S 11.1V 500mAh 35C/70C |
| for 3-channel control | Motor, rudder, elevator |
slicer
print profile
print parts
assembling manual
accessories
Center of gravity
maiden flight